GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor: the MVSI 075/910-S08-TS is a three-phase 8-pole foot-mounted electric vibrator motor with a split, radially removable weight cover.
AUDIMAT Availability
The split-cover version of the MVSI 075/910-S08, this small 8-pole vibrator motor combines low speed with easy maintenance thanks to its radially removable cover.
If the weights wear or a fault occurs, the cover comes off radially without unbolting the motor from its mount — real time saved on an installation already in service.
| Centrifugal force (100%, 50Hz) | 6,30 kN |
| Speed (50Hz) | 750 rpm |
| Current (400V/50Hz) | 1,40 A |
| Weight | 56,8 kg |
| Dimensions L×W×H (1 cover) | 595×246×258 mm |
| Length (2 covers) | 616 mm |
| Protection | IP66 IK08 |
| Brand | Italvibras |
Particularly suited to the following applications:
The MVSI 075/910-S08-TS houses a three-phase asynchronous motor mounted on lifetime-greased ball bearings with double shielding. The cast iron housing gives IP66 IK08 protection, for continuous operation from -20°C to +40°C, including in damp or dusty surroundings.
As with every vibrator motor using eccentric weights, centrifugal force is set through the weights at both ends of the motor shaft. What sets this one apart: the weight cover splits into two half-shells removed radially, rather than the usual axial removal. Every version is tropicalised as standard, with class H trickle impregnation on the larger sizes.
A question about sizing, mounting or compatibility with your installation? Explore the full MVSI-TS range or get in touch.