GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor: the MVSI 10/19500-S02-TS is a three-phase 6-pole foot-mounted electric vibrator motor with a split, radially removable weight cover.
AUDIMAT Availability
The MVSI 10/19500-S02-TS takes the MVSI 10/19500-S02 with a radially removable weight cover, an asset for maintenance on the largest installations.
If the weights wear or a fault occurs, the cover comes off radially without unbolting the motor from its mount — real time saved on an installation already in service.
| Centrifugal force (100%, 50Hz) | 197 kN |
| Speed (50Hz) | 1’000 rpm |
| Current (400V/50Hz) | 24,5 A |
| Weight | 711 kg |
| Dimensions L×W×H (1 cover) | 1150×526×566 mm |
| Length (2 covers) | 1180 mm |
| Protection | IP66 IK08 |
| Brand | Italvibras |
Particularly suited to the following applications:
The MVSI 10/19500-S02-TS houses a three-phase asynchronous motor mounted on lifetime-greased ball bearings with double shielding. The cast iron housing gives IP66 IK08 protection, for continuous operation from -20°C to +40°C, including in damp or dusty surroundings.
As with every vibrator motor using eccentric weights, centrifugal force is set through the weights at both ends of the motor shaft. What sets this one apart: the weight cover splits into two half-shells removed radially, rather than the usual axial removal. Continuous duty (S1) at the declared maximum centrifugal force and electrical power.
A question about sizing, mounting or compatibility with your installation? Explore the full MVSI-TS range or get in touch.