GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor: the MVSI 10/7000-S02-TS is a three-phase 6-pole foot-mounted electric vibrator motor with a split, radially removable weight cover.
AUDIMAT Availability
This model pairs the force of the MVSI 10/7000-S02 with a cover split into two half-shells, for quick replacement of wearing parts.
Handy for preventive maintenance: the weights stay reachable from the side, even when the vibrator is recessed into the machine.
| Centrifugal force (100%, 50Hz) | 68,8 kN |
| Speed (50Hz) | 1’000 rpm |
| Current (400V/50Hz) | 8,20 A |
| Weight | 276 kg |
| Dimensions L×W×H (1 cover) | 866×370×382 mm |
| Length (2 covers) | 892 mm |
| Protection | IP66 IK08 |
| Brand | Italvibras |
Particularly suited to the following applications:
The MVSI 10/7000-S02-TS houses a three-phase asynchronous motor mounted on lifetime-greased ball bearings with double shielding. The cast iron housing gives IP66 IK08 protection, for continuous operation from -20°C to +40°C, including in damp or dusty surroundings.
As with every vibrator motor using eccentric weights, centrifugal force is set through the weights at both ends of the motor shaft. What sets this one apart: the weight cover splits into two half-shells removed radially, rather than the usual axial removal. The bearings are greased for life at the factory and need no additional lubrication at start-up.
A question about sizing, mounting or compatibility with your installation? Explore the full MVSI-TS range or get in touch.