GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor : direct current vibrator motor, powered straight from the battery, for installations with no mains supply.
DIRECT CURRENT — 12 OR 24 V
AUDIMATAvailability
The MVCC 3/200-S08 MF delivers 1,99 kN at 3’000 rpm for 6,3 kg, with the same consumption as the 3/100 — 190 W, 8 A at 12 V or 4 A at 24 V.
This is the most widely used reference in the series on construction and road maintenance vehicles, where its multi-hole base simplifies mounting. Audimat, official Italvibras distributor.
| Supply | Direct current 12 or 24 V |
| Centrifugal force (100 %) | 1,99 kN — 203 kgf |
| Speed | 3’000 rpm |
| Static moment | 20,2 kgmm |
| Power | 190 W |
| Max. current at 12 V | 8,00 A |
| Max. current at 24 V | 4,00 A |
| Weight | 6,3 kg |
| Dimensions L×W×H | 231 × 162 × 146,5 mm |
| Cable gland | M20x1,5 |
| Mounting base | Multi-hole |
| Weight covers | aluminium alloy |
| Protection | IP66 — IK08 |
| Ambient temperature | −20 to +40 °C |
| Cable supplied | 2,5 m, high-strength synthetic rubber |
| Item code | 600419 |
| Brand | Italvibras |
Overall dimensions from the Italvibras catalogue (A × C × B).
Documents to download
Documentation reserved for Audimat customers — request the access code.
Particularly suited to the following applications :
On the MVCC 3/200-S08 MF, the battery’s direct current does not feed the motor directly. Italvibras patented a different arrangement : an electronic board, housed inside the vibrator itself, converts the direct current and feeds a three-phase asynchronous motor with vacuum-impregnated windings. The machine therefore keeps everything that makes an industrial motor reliable — no brushes, no commutator, so no electrical wearing parts — while running off a battery. High-strength aluminium alloy frame, cast iron bearing flange, alloy steel shaft with isothermal hardening, aluminium alloy weight covers.
Protection IP66, impact resistance IK08, continuous duty S1 from −20 °C to +40 °C, mounting in any position without restriction. The ball bearings are sealed and lubricated for life : no greasing required. Centrifugal force is adjusted steplessly through the position of the eccentric weights. A 2,5-metre high-strength synthetic rubber supply cable is supplied with the vibrator.
A question about sizing, consumption or mounting on your vehicle ? get in touch.