GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor : three-phase 4-pole foot-mounted electric screen vibrator, for industrial screening in continuous duty.
AUDIMATAvailability
The MVT 15/3500-S08 opens the Italvibras screen vibrator series. At 1’500 rpm it delivers 33,8 kN on 50 Hz on a size 70 frame, for 169 kg.
Its three-part frame — high-strength aluminium alloy centre section, outer sections in aluminium or spheroidal graphite cast iron — is designed for horizontal mounting on a screen chassis. Audimat, official Italvibras distributor.
| Centrifugal force (100 %, 50 Hz) | 33,8 kN |
| Centrifugal force (100 %, 60 Hz) | 34,3 kN |
| Speed (50 Hz) | 1’500 rpm |
| Static moment (50 Hz) | 1369 kgmm |
| Rated power (50 Hz) | 2200 W |
| Max. current (400 V / 50 Hz) | 3,90 A |
| Weight | 169 kg |
| Dimensions L×W×H | 1130 × 284 × 325 mm |
| Frame size | 70 |
| Cable gland | NPT 3/4", no cable gland |
| Thermal protection | On request |
| Insulation class | F (155 °C) |
| Protection | IP66 — IK08 |
| Ambient temperature | −20 to +40 °C |
| Item code | 601535 |
| Brand | Italvibras |
Overall dimensions from the Italvibras catalogue (A × C × B).
Documents to download
Documentation reserved for Audimat customers — request the access code.
Particularly suited to the following applications :
The MVT 15/3500-S08 houses a three-phase asynchronous motor , supplied up to 690 V at 50 or 60 Hz. Its frame is built in three parts : a high-strength aluminium alloy centre section and outer sections in aluminium or spheroidal graphite cast iron. Protection IP66, impact resistance IK08, insulation class F (155 °C), continuous duty S1 from −20 °C to +40 °C.
The windings are trickle-impregnated with class H resin, the rotor is die-cast aluminium and the shaft alloy steel with isothermal hardening. Tropicalisation is standard on every screen vibrator. Thermal protection is not fitted as standard on the MVT series : it is available on request.
Centrifugal force is adjusted steplessly, as a percentage of the maximum value, through the eccentric weights reachable with hand tools — allowing the screen’s behaviour to be fine-tuned. Mounting is typically horizontal. The vibrators are lubricated at the factory and need no lubrication at commissioning, and they are supplied no cable gland, with an NPT threaded opening : it is up to the installer to fit a suitable one.
A question about sizing, mounting or compatibility with your screen ? get in touch.