Findeva VTC-12 Vacuum Clamp
This vacuum clamp for vibrator Findeva VTC-12 allows temporary mounting of a vibrator on a wall, without drilling or welding.
Availability
Description of the vacuum clamp for vibrator Findeva VTC-12
Available in a single version, fitted with one suction cup.
It allows the vibrator’s air supply to be connected easily alongside that of the clamp, for a quick and reversible installation.
Specifications
Compatible vibrators
VTC-12S — DAR-2, DAR-4, K-8 à -25, FP(LF)-25/35, R-50/80, GT-8 à -25, T-50 à -80
See the full range : Vacuum Clamps VTC
Downloadable documents
PDF Technical data sheet vacuum clamps VTC PDF Operating manual vacuum clamps VTCApplications of the vacuum clamp for vibrator VTC-12
This vacuum clamp for vibrator is particularly suited for:
- Temporary mounting of a vibrator on silos, containers, reactors or pipelines
- Vibration trials before permanent installation
- One-off applications that do not justify a permanent mount
- Smooth, clean, slightly curved surfaces, for better grip
Construction and operation of the VTC-12
The clamp uses one or more vacuum-actuated suction cups, combined with a drilled mounting plate to receive the vibrator. Compressed air feeds both the suction cup’s vacuum and the vibrator itself, via two separate circuits grouped on the same hose. A smooth, clean, slightly curved surface significantly improves the clamp’s grip. As soon as the vacuum supply is cut, the clamp detaches without leaving a mark, allowing it to be reused at another application point.
Technical_data_VTC-Vacuum_clamps