GOOD VIBRATION
Supplied by Audimat, official Italvibras distributor : high-frequency vibrator with fixed frequency, for precast concrete and every application calling for high speeds.
6.000 VIBRATIONS/MIN — BOLT-HOLE MOUNTING
AUDIMATAvailability
The ITVAF 6/2010-S90 delivers 19,4 kN at 6.000 vibrations per minute, for 41 kg.
The frequency is fixed : no inverter required, which makes the installation simpler and less costly.
| Type of frequency | Fixed |
| Vibration range | 6.000 vibrations/min |
| Centrifugal force | 19,4 kN — 1978 kgf |
| Frame size | AF50 |
| Mounting type | Bolt holes |
| Weight | 41 kg |
| Max. power input | 2000 W |
| Max. current at 42 V / 100 Hz | 35,0 A |
| Max. current at 400 V / 100 Hz | 5,90 A |
| Ia/In ratio | 8,00 |
| Power supply | Three-phase from 24 to 690 V depending on type and frequency |
| Protection | IP66 — IK08 |
| Insulation class | F (155 °C) |
| Ambient temperature | −20 to +40 °C |
| Thermal protection | On request, PTC thermistor 130 °C |
| Frame | Spheroidal graphite cast iron |
| Weight covers | High-strength aluminium alloy |
| Part number | 603037 |
| Brand | Italvibras |
The ITVAF 6/2010-S90 is built around a three-phase induction motor, supplied from 24 to 690 V depending on type and frequency. The frame is made of spheroidal graphite cast iron and the weight covers of high-strength aluminium alloy. The shaft is alloy steel, austempered, and the bearings are of a specific design, drawn for Italvibras to carry heavy loads at high speed — the critical point on this type of machine.
IP66 protection, IK08 impact resistance, insulation class F, tropicalisation as standard, continuous duty S1 from −20 to +40 °C. Mounting is possible in any position. Declared conformity covers the Low Voltage Directive 2014/35/EU and standards EN/IEC 60034-1, UL 1004-1, CSA C22.2 No.100 and NEMA MG-1 ; CSA approval (certificate LR 100948) and EAC certification also apply.
See the full ITVAF range, or contact us for sizing assistance.