Findeva VTC-20 Vacuum Clamp
This temporary mounting clamp Findeva VTC-20 allows temporary mounting of a vibrator on a wall, without drilling or welding.
Availability
Description of the temporary mounting clamp Findeva VTC-20
Available in single (1 suction cup) and double versions (2 suction cups, D series) depending on load and surface to cover.
It allows the vibrator’s air supply to be connected easily alongside that of the clamp, for a quick and reversible installation.
Specifications
Compatible vibrators
VTC-20S — K-20/25, GT-20/25, FP(LF)-50 M/60M, FAL-35, R-80, T-80
VTC-20D — DAR-5, GT-30/36, FP(LF)-60/95 M, R-100, T-100, FKL-150 in
See the full range : Vacuum Clamps VTC
Downloadable documents
PDF Technical data sheet vacuum clamps VTC PDF Operating manual vacuum clamps VTCApplications of the temporary mounting clamp VTC-20
This temporary mounting clamp is particularly suited for:
- Temporary mounting of a vibrator on silos, containers, reactors or pipelines
- Vibration trials before permanent installation
- One-off applications that do not justify a permanent mount
- Smooth, clean, slightly curved surfaces, for better grip
Construction and operation of the VTC-20
The clamp uses one or more vacuum-actuated suction cups, combined with a drilled mounting plate to receive the vibrator. Compressed air feeds both the suction cup’s vacuum and the vibrator itself, via two separate circuits grouped on the same hose. A smooth, clean, slightly curved surface significantly improves the clamp’s grip. As soon as the vacuum supply is cut, the clamp detaches without leaving a mark, allowing it to be reused at another application point.
Technical_data_VTC-Vacuum_clamps