GOOD VIBRATION
Supplied and delivered by Audimat, official Italvibras distributor: the MVSI 15/3810-S02-TS is a three-phase 4-pole foot-mounted electric vibrator motor with a split, radially removable weight cover.
AUDIMAT Availability
Taken straight from the MVSI series, the MVSI 15/3810-S02-TS stands out for its weight cover split into two radially removable half-shells. This design is essential where the vibrator’s position on the machine rules out axial removal of the cover but leaves room for radial removal.
Audimat, official Italvibras distributor: available in several voltage and frequency combinations (230V/400V 50Hz), this model suits European installations as readily as export work.
| Centrifugal force (100%, 50Hz) | 37,7 kN |
| Speed (50Hz) | 1’500 rpm |
| Current (400V/50Hz) | 3,90 A |
| Weight | 120 kg |
| Dimensions L×W×H (1 cover) | 624×321×326 mm |
| Length (2 covers) | 664 mm |
| Protection | IP66 IK08 |
| Brand | Italvibras |
Particularly suited to the following applications:
The MVSI 15/3810-S02-TS houses a three-phase asynchronous motor mounted on lifetime-greased ball bearings with double shielding. The cast iron housing gives IP66 IK08 protection, for continuous operation from -20°C to +40°C, including in damp or dusty surroundings.
As with every vibrator motor using eccentric weights, centrifugal force is set through the weights at both ends of the motor shaft. What sets this one apart: the weight cover splits into two half-shells removed radially, rather than the usual axial removal — useful where the space around the machine does not allow the vibrator to be drawn out along its axis. From size 70 upwards, a PTC thermistor 130°C is fitted as standard for motor thermal protection.
A question about sizing, mounting or compatibility with your installation? The Audimat technical team will see you through from choosing the reference to commissioning — get in touch.