GOOD VIBRATION

Mechanical exciter Italvibras VR 5000/6-S08

Supplied by Audimat, official Italvibras distributor : mechanical exciter with rotational motion for medium and large vibrating machines. No built-in motor — it is driven by an external motor.

Mechanical exciter Italvibras VR 5000/6-S08
AudimatAUDIMAT

Availability

Variable stockContact us
Made to orderItalvibras
Used in pairs
VR exciters are designed to work in pairs on the vibrating machine. The weight given is that of the pair. Two pairs in parallel produce a directional vibration at high force.
Request a quote →

The VR 5000/6-S08 at Audimat

The VR 5000/6-S08 is a mechanical exciter, size 280, with rotational motion. Depending on the weights fitted, it delivers 106 kN. It is driven by a motor rated at 5,5 kW.

The force is set simply by choosing the additional weights. Audimat is an official Italvibras distributor.

Technical data

Type of motionRotational
Size280
Drive motor rating5,5 kW
Centrifugal force106 kN
Static moment4294 to 9693 kgmm
Maximum speed1000 to 1500 rpm
Weight of the pair143+143 to 171+171 kg
Part numbers0605043 (1U) and 0605044 (2U)
BrandItalvibras

The two weight configurations

ConfigurationPart no.Static momentMax. speedForceWeight of pair
1U — minimum weights06050434294 kgmm1500 rpm106 kN143+143 kg
2U — maximum weights06050449693 kgmm1000 rpm106 kN171+171 kg

The working moment is twice the static moment. Fitting more weights increases the moment but lowers the maximum permissible speed.

Applications of the VR 5000/6-S08

An exciter, not a vibrator motor

The difference is fundamental. A conventional vibrator motor contains its own electric motor and is wired directly. A mechanical exciter does not : it is a set of eccentric weights mounted on bearings, driven by an external motor that you select and size yourself. That is why the catalogue quotes a rating in kW rather than a voltage or a current.

This approach makes sense on medium and large machines : separating the vibrating part from the driving part reduces the loads on the motor and extends the service life of the whole assembly. The catalogue also stresses the care taken over noise reduction and over the durability of bearings and gears. The exciter is built around an induction motor driven from outside.

The force is not adjusted by phasing weights as on a vibrator motor, but by choosing the additional weights. The table above gives the two extreme configurations ; several intermediate values are available between them.

See the full VR range, or contact us for sizing assistance.