GOOD VIBRATION

Mechanical exciter Italvibras VR 10000/6-S08

Supplied by Audimat, official Italvibras distributor : mechanical exciter with rotational motion for medium and large vibrating machines. No built-in motor — it is driven by an external motor.

Mechanical exciter Italvibras VR 10000/6-S08
AudimatAUDIMAT

Availability

Variable stockContact us
Made to orderItalvibras
Used in pairs
VR exciters are designed to work in pairs on the vibrating machine. The weight given is that of the pair. Two pairs in parallel produce a directional vibration at high force.
Request a quote →

The VR 10000/6-S08 at Audimat

The VR 10000/6-S08 is a mechanical exciter, size 297, with rotational motion. Depending on the weights fitted, it delivers 238 to 259 kN. It is driven by a motor rated at 11 kW.

The force is set simply by choosing the additional weights. Audimat is an official Italvibras distributor.

Technical data

Type of motionRotational
Size297
Drive motor rating11 kW
Centrifugal force238 to 259 kN
Static moment10410 to 19700 kgmm
Maximum speed1094 to 1444 rpm
Weight of the pair255+255 to 296+296 kg
Part numbers0605046 (1U) and 0605047 (2U)
BrandItalvibras

The two weight configurations

ConfigurationPart no.Static momentMax. speedForceWeight of pair
1U — minimum weights060504610410 kgmm1444 rpm238 kN255+255 kg
2U — maximum weights060504719700 kgmm1094 rpm259 kN296+296 kg

The working moment is twice the static moment. Fitting more weights increases the moment but lowers the maximum permissible speed.

Applications of the VR 10000/6-S08

An exciter, not a vibrator motor

The difference is fundamental. A conventional vibrator motor contains its own electric motor and is wired directly. A mechanical exciter does not : it is a set of eccentric weights mounted on bearings, driven by an external motor that you select and size yourself. That is why the catalogue quotes a rating in kW rather than a voltage or a current.

This approach makes sense on medium and large machines : separating the vibrating part from the driving part reduces the loads on the motor and extends the service life of the whole assembly. The catalogue also stresses the care taken over noise reduction and over the durability of bearings and gears. The exciter is built around an induction motor driven from outside.

The force is not adjusted by phasing weights as on a vibrator motor, but by choosing the additional weights. The table above gives the two extreme configurations ; several intermediate values are available between them.

See the full VR range, or contact us for sizing assistance.