GOOD VIBRATION

Mechanical exciter Italvibras VU 14000/6-S08

Supplied by Audimat, official Italvibras distributor : mechanical exciter with linear motion for medium and large vibrating machines. No built-in motor — it is driven by an external motor.

Mechanical exciter Italvibras VU 14000/6-S08
AudimatAUDIMAT

Availability

Variable stockContact us
Made to orderItalvibras
Can be installed in line
VU exciters can be installed in line, connected by cardan shafts, to add up their centrifugal forces. The drive motor rating differs depending on whether you fit one or two.
Request a quote →

The VU 14000/6-S08 at Audimat

The VU 14000/6-S08 is a mechanical exciter, size 295, with linear motion. Depending on the weights fitted, it delivers 179 kN. It is driven by a motor rated at 7,5 kW, or 15 kW for two exciters.

The force is set simply by choosing the additional weights. Audimat is an official Italvibras distributor.

Technical data

Type of motionLinear
Size295
Drive motor rating7,5 kW for one exciter
15 kW for two
Centrifugal force179 kN
Static moment7642 to 13955 kgmm
Maximum speed1080 to 1460 rpm
Weight430 to 490 kg
Part number0605022
BrandItalvibras

The two weight configurations

ConfigurationStatic momentMax. speedForceWeight
Minimum weights7642 kgmm1460 rpm179 kN430 kg
Maximum weights13955 kgmm1080 rpm179 kN490 kg

The working moment is twice the static moment. Fitting more weights increases the moment but lowers the maximum permissible speed.

Applications of the VU 14000/6-S08

An exciter, not a vibrator motor

The difference is fundamental. A conventional vibrator motor contains its own electric motor and is wired directly. A mechanical exciter does not : it is a set of eccentric weights mounted on bearings, driven by an external motor that you select and size yourself. That is why the catalogue quotes a rating in kW rather than a voltage or a current.

This approach makes sense on medium and large machines : separating the vibrating part from the driving part reduces the loads on the motor and extends the service life of the whole assembly. The catalogue also stresses the care taken over noise reduction and over the durability of bearings and gears. The exciter is built around an induction motor driven from outside.

The force is not adjusted by phasing weights as on a vibrator motor, but by choosing the additional weights. The table above gives the two extreme configurations ; several intermediate values are available between them.

See the full VU range, or contact us for sizing assistance.