High-frequency vibrator Italvibras ITV-VR/1210-S08

Supplied by Audimat, official Italvibras distributor : high-frequency vibrator with variable frequency, for precast concrete and every application calling for high speeds.

AUDIMAT

Availability

Variable stockContact us

Made to orderItalvibras

Controlled frequency
This vibrator requires an electronic frequency inverter or an electromechanical converter. Italvibras supplies inverters, fixed or mobile control panels, with manual or radio control, on request.

Request a quote →

The ITV-VR/1210-S08 at Audimat

The ITV-VR/1210-S08 delivers 15,4 kN at 0 to 6.000 vibrations per minute, for 23 kg.

The frequency is continuously adjustable, letting you match the vibration to the product and to the moulding stage.

Technical data

Type of frequency	Variable
Vibration range	0 to 6.000 vibrations/min
Centrifugal force	15,4 kN — 1569 kgf
Frame size	AF33
Mounting type	Bolt holes
Weight	23 kg
Max. power input	1200 W
Max. current at 42 V / 100 Hz	21,0 A
Max. current at 400 V / 100 Hz	2,30 A
Ia/In ratio	4,48
Power supply	Three-phase from 24 to 690 V depending on type and frequency
Protection	IP66 — IK08
Insulation class	F (155 °C)
Ambient temperature	−20 to +40 °C
Thermal protection	On request, PTC thermistor 130 °C
Frame	High-strength aluminium alloy
Weight covers	High-strength aluminium alloy
Part number	600500
Brand	Italvibras

Applications of the ITV-VR/1210-S08

Vibrating tables for precast concrete
Moulds and formwork with adjustable vibration
Vibration benches with controlled frequency

Construction and operation

The ITV-VR/1210-S08 is built around a three-phase induction motor, supplied from 24 to 690 V depending on type and frequency. The frame is made of high-strength aluminium alloy and the weight covers of high-strength aluminium alloy. The shaft is alloy steel, austempered, and the bearings are of a specific design, drawn for Italvibras to carry heavy loads at high speed — the critical point on this type of machine.

IP66 protection, IK08 impact resistance, insulation class F, tropicalisation as standard, continuous duty S1 from −20 to +40 °C. Mounting is possible in any position. Declared conformity covers the Low Voltage Directive 2014/35/EU and standards EN/IEC 60034-1, UL 1004-1, CSA C22.2 No.100 and NEMA MG-1 ; CSA approval (certificate LR 100948) and EAC certification also apply.

Two mounting types in this range

Bolt-hole mounting fixes the vibrator directly onto the structure. Cradle mounting uses a standardised RS2 support, which makes removal and replacement easier — useful on a precast table where vibrators are changed regularly. This reference uses bolt-hole mounting.

This range is not ATEX certified

Declared conformity covers the applicable European directives, without certification for explosive atmospheres. For an installation in a classified area, turn to the ATEX series of the catalogue.

See the full ITV-VR range, or contact us for sizing assistance.