GOOD VIBRATION
Supplied by Audimat, official Italvibras distributor : high-frequency vibrator with variable frequency, for precast concrete and every application calling for high speeds.
0 TO 4.500 VIBRATIONS/MIN — BOLT-HOLE MOUNTING
AUDIMATAvailability
The ITV-VR/5000-S02 delivers 52,0 kN at 0 to 4.500 vibrations per minute, for 105 kg.
The frequency is continuously adjustable, letting you match the vibration to the product and to the moulding stage.
| Type of frequency | Variable |
| Vibration range | 0 to 4.500 vibrations/min |
| Centrifugal force | 52,0 kN — 5300 kgf |
| Frame size | AF70 |
| Mounting type | Bolt holes |
| Weight | 105 kg |
| Max. power input | 5000 W |
| Max. current at 42 V / 100 Hz | Not stated |
| Max. current at 400 V / 100 Hz | 8,00 A |
| Ia/In ratio | 5,30 |
| Power supply | Three-phase from 24 to 690 V depending on type and frequency |
| Protection | IP66 — IK08 |
| Insulation class | F (155 °C) |
| Ambient temperature | −20 to +40 °C |
| Thermal protection | PTC thermistor 130 °C fitted as standard |
| Frame | Spheroidal graphite cast iron |
| Weight covers | High-strength aluminium alloy |
| Part number | 600514 |
| Brand | Italvibras |
The ITV-VR/5000-S02 is built around a three-phase induction motor, supplied from 24 to 690 V depending on type and frequency. The frame is made of spheroidal graphite cast iron and the weight covers of high-strength aluminium alloy. The shaft is alloy steel, austempered, and the bearings are of a specific design, drawn for Italvibras to carry heavy loads at high speed — the critical point on this type of machine.
IP66 protection, IK08 impact resistance, insulation class F, tropicalisation as standard, continuous duty S1 from −20 to +40 °C. Mounting is possible in any position. Declared conformity covers the Low Voltage Directive 2014/35/EU and standards EN/IEC 60034-1, UL 1004-1, CSA C22.2 No.100 and NEMA MG-1 ; CSA approval (certificate LR 100948) and EAC certification also apply.
See the full ITV-VR range, or contact us for sizing assistance.